Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterSingle Car Door in Whitney, NV
A single car door is a garage door sized for a one-car opening, typically 8 to 9 feet wide and 7 to 8 feet tall, and installing one in Whitney usually runs $950 to $2,100 depending on material, insulation, and whether the old door and track come out first. Most of the homes we see off Whitney Ranch and along Warm Springs are working with a standard 16-foot double bay, and some owners want to split it or replace a worn single bay that’s finally given out. We install single doors in steel, aluminum, and wood-look composite, matched to the rest of the house and to the opener already on the ceiling.
We’ve been doing this work since 1984, and a single car door is one of the jobs where the details matter more than the door itself: the header, the spring balance, the weather seal along a garage that faces the afternoon sun. Get those right and the door runs quiet for years. Get them wrong and you’ll hear about it every morning.
Call (844) 797-9248 and a live person answers, day or night. We’ll give you a flat price before anyone touches a wrench. If you’re weighing a single bay against a wider opening, our Garage Door Installation in Whitney page covers the full range of sizes and styles we handle, and this page drills into the single-door work specifically.
When You Need a Single Car Door
Homeowners call us about single doors for a handful of reasons that come up again and again in this part of the valley. Here’s what we hear most:
- The old door is rusting from the inside out. Whitney sits in a stretch of the Mojave where summer highs push past 105°F and the garage bakes all afternoon. A west-facing steel door with a thin factory finish will start to blister and rust along the bottom rail within a decade. Once water gets behind the paint, patching it is throwing money at a door that’s already tired.
- The door has been hit and the panels won’t line up. A bumped fender, a kid on a bike, a mower that got away. Single doors take more direct hits than doubles because there’s less room to swing wide, and bent panels throw off the whole track.
- You’re remodeling and want the garage to match the house. New stucco, new paint, new front door, and the garage door is the last thing that looks like 1998. A single Clopay or Amarr door in a carriage style can pull the whole front elevation together.
- The opener is fine but the door is hollow and loud. Uninsulated single doors rattle and let the heat straight through. If the room above the garage is a bedroom or a workshop, an insulated single door makes a real difference in how that space feels in July.
- You want to convert a double bay into two singles. Some Whitney homeowners with a wide opening decide they’d rather have two separate doors, each with its own opener, so one side can stay closed while the other opens. It’s a framing and header job as much as a door job, and we quote it that way.
- The door is a Wayne Dalton or Genie original from the build and the parts are getting hard to find. Plenty of Whitney homes went up in the late ’90s and early 2000s with builder-grade doors. When a spring or a hinge fails on a 25-year-old unit, replacing the door is often the square deal versus chasing discontinued parts.
Our Single Car Door Process
We keep the process plain so you know what’s happening and when. Here’s how a single car door job runs from the first call to the final walk-around:
- You call and we talk it through. A live person picks up at any hour. We ask about the opening size, the current door, the opener, and what’s prompting the call. That conversation usually tells us whether we’re looking at a replacement or a repair.
- We come out and measure. On site, we measure the rough opening, check the header for sag, look at how the track is anchored, and confirm the headroom above the door for the opener and springs. Whitney garages vary more than people expect, and a door that fits the opening but not the structure is a problem we’d rather catch on day one.
- You get a flat price in writing. Before any work starts, you’ll see the number: door, hardware, track, springs, labor, haul-away of the old unit. No surprises on the bill. If you’ve got a written estimate from another shop, we’ll give you a free second opinion on it.
- We install in a single visit when we can. Our technicians arrive with springs, cables, hinges, and openers already on the truck, so most single door installs finish the same day. The old door comes down, the new track goes up, the door gets hung and balanced, and the opener gets set and tested.
- We test it in front of you and walk you through it. Safety reverse, balance, travel limits, seal to the floor. You’ll see the door go up and down and stop where it should. We don’t leave until it’s right.
- We back it in writing for 90 days. Every completed job carries our 90-Day Done Right Promise. If something isn’t right, we come back at no charge. No paperwork to chase, no arguing about it.
Our technicians are background-checked, in uniform, and have up to 10 years of experience on doors and openers. They’re factory-familiar with the major brands, and we work with LiftMaster and Chamberlain openers as readily as we do Genie. If your existing opener is a Chamberlain and still going strong, we’ll keep it rather than sell you something you don’t need.
Single Car Door Pricing in Whitney
Here’s what single car doors actually run in Whitney, stated plainly so you can plan. Prices below are typical ranges, not quotes. Your exact number depends on the door you pick and what we find when we measure.
| Item | Typical Range |
|---|---|
| Basic steel single door (uninsulated, 8×7) | $950 – $1,350 |
| Insulated steel single door | $1,250 – $1,800 |
| Carriage-style or composite single door | $1,600 – $2,100+ |
| New track and hardware (if not included) | $150 – $300 |
| Opener replacement or new install | $350 – $650 |
| Old door haul-away | $75 – $150 |
| Framing adjustment for a converted opening | Quoted per job |
What moves the number: the door material and insulation, whether the opening needs framing work, whether the opener is being replaced, and whether we’re pulling a double and installing two singles. Whitney’s heat plays a role in what we recommend, too. A door that faces the western sun all afternoon will hold up better with a factory finish rated for UV exposure, and we’ll tell you which lines that points toward rather than letting you pick on color alone.
We state the flat price before any work begins. If the work runs over $250, our standing $50 Off Any Repair Over $250 applies, and there’s a permanent 5% discount for seniors and veterans. Our $89 Seasonal Tune-Up keeps a new door running right through the seasons, and it’s worth doing in the spring before the heat sets in.
One safety note before we move on. Garage door springs and cables carry serious stored tension, and a single door’s torsion spring can do real damage to a hand or an arm if it lets go during work. We don’t publish step-by-step instructions for adjusting springs or cables, and we’d rather you didn’t try. That’s a job for a trained technician with the right tools. If you hear a bang from the garage and the door won’t lift, stop pulling on it and call us.
FAQs – Single Car Door
How much does a single car door cost in Whitney?
A single car door installed in Whitney typically costs $950 to $2,100, with most homeowners landing in the $1,200 to $1,700 range for an insulated steel door including hardware and install. The low end is a basic uninsulated door; the high end is a carriage-style or composite unit, or a job that needs framing work. Call (844) 797-9248 for an exact quote. Estimates are free, and the price is flat before we start.
Can you install a single car door the same day?
Yes, in most cases. Our technicians carry springs, cables, hinges, and openers on the truck, so a standard single door replacement is usually finished in a single visit. The exceptions are doors in a special order size or finish we don’t stock, or jobs where the header needs repair first. We’ll tell you which situation you’re in when we quote. Call (844) 797-9248 to get on the schedule.
Is it cheaper to repair or replace a single car door?
Repair is cheaper when the door is structurally sound and the problem is a spring, a cable, a roller, or a hinge. Replacement makes more sense when panels are bent, the door is rusting from the inside, or the unit is 20-plus years old and parts are hard to source. A good rule: if the repair is more than half the cost of a new door, replace it. We’ll give you both numbers so you can decide. Call (844) 797-9248 for a free estimate either way.
Do you install doors that match my house in Whitney?
Yes. We work with Clopay, Amarr, and Wayne Dalton among others, and we can match the door to your existing stucco, paint, and trim. Whitney’s housing stock runs from ranch-style homes off Whitney Ranch Parkway to newer builds near Warm Springs, and we’ll suggest a style that fits what’s already there. We’ll also tell you which finishes hold up to the sun. Call (844) 797-9248 and we’ll walk through options on site.
Key Takeaways
- Single car doors in Whitney typically run $950 to $2,100 installed, with most jobs in the $1,200 to $1,700 range.
- Most single door replacements finish in one visit because our technicians bring springs, cables, and openers on the truck.
- Every job is backed by our 90-Day Done Right Promise, in writing.
- Live person answers the phone any hour of the day.
- Flat price stated before work begins, no surprises on the bill.
If a single car door is on your list, whether it’s a tired builder-grade unit or a fresh install for a converted opening, pick up the phone and we’ll give you a straight answer. We’ll measure, quote a flat price, and stand behind the work in writing. Call (844) 797-9248 for a free estimate, and we’ll be there when we say.
Written by the team at Mainspring Garage Door Co. Whitney, serving Whitney.